Go-power GP-PWM-25 Manuale Utente Scaricare il pdf (Pagina 12)

Owner’s Manual | GP-PWM-25 Regulator

Last revised March 2010

Confirm the Battery Type / Charging Profile selection

by pressing the A Button.

Depending on the battery voltage when the GP-PWM-25 Power Up occurs, the GP-PWM-25 may

do a Boost Charge or quickly go into Float Charge. The Charging Profile selected will commence

the following day after a Power Up.

Battery Charge Profile Chart

Auto Equalize:

The GP-WWM-

25 has an

automatic

equalize

feature that will

charge and

recondition

your batteries

once a month

at a higher

voltage to

ensure that any

excess

sulfation is

removed. This

feature is

recommended

for Flooded

batteries only.

Check with

your battery manufacturer.

NOTE: This feature is only available for Charging Profile 1.

Battery Type

FLOODED AGM GEL

Charging Profile # 1 2 3

Float Charge @ 25°C: 13.7 / 27.4V

Bulk/Absorption Charge @ 25°C:

Applied for 30 min each morning

14.4 / 28.8V

14.1 /

28.2V

Boost Charge

Applied for 2 hours if the battery voltage drops

below 12.3 volts.

14.4 / 28.8V

14.1 /

28.2V

Equalization Charge

Applied for 2 hours every 28 days and if the

battery voltage drops below 12.1 volts.

14.8 / 29.6V N/A N/A

The Boost Charge will occur in addition to the Bulk Charge. The Equalization Charge will

occur in addition to the Boost Charge.

If a charging cycle is unable to complete in a single day, it will continue the following day.

The terms FLOODED, AGM and GEL are generic battery designations. Choose the

charging profile that works best with your battery manufacturer’s recommendations.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Commenti su questo manuale

Nessun commento

Go-power GP-PWM-25 Manuale Utente Pagina 12

Commenti su questo manuale

Prodotti e manuali riguardandi Sensori Go-power GP-PWM-25